AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For customers seeking a reliable Controllers parts distributor, Broadline Electromechanicals is an optimal solution with over 2 billion items that are readily available at any time. We thank you for taking an interest in part number TSXCAY41C, a Schneider Electric product we have in stock that is listed alongside the description “Motion Control Modules - For Servomotors - 8 Ms.10 S - 4 Axes”. When you are ready to begin the purchasing process for part number TSXCAY41C, we provide online RFQ forms to fill out and submit for the means of receiving a competitive quote for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
With AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation, we regularly go above and beyond industry expectations to bring customers the best Schneider Electric products on the market with every purchase. Additionally, we are fully committed to alleviating diverse time constraints, offering expedited shipping speeds on countless items for domestic and international orders alike. We are also experts in tracking down electromechanical parts with long lead times, unearthing solutions when alternative channels come up short. With such commitments in mind, kick off procurement for part number TSXCAY41C and other Motion Control Modules - For Servomotors - 8 Ms.10 S - 4 Axes products today.
| Acceleration time | 8 ms...10 s |
| Acquisition speed | <= 270000 points/mn |
| Analogue output range | +/- 10...24 V |
| Analogue output resolution | 13 bits + sign |
| Checks | Consistency of commands |
| Clock frequency | 200 kHz SSI absolute encoder |
| Current consumption | 1500 mA 5 V DC |
| Current state 0 guaranteed | < 1 mA counter input |
| Current state 1 guaranteed | > 3.5 mA servo drive control input |
| Electrical connection | 1 connector HE-10 20 pins for servo drive ctrl inputs + for ext power supply of servo drive inputs/outputs |
| I/O modularity | 4 axes |
| Incremental encoder frequency x 4 | 1000 kHz in counting |
| Incremental encoder frequency x1 | 500 kHz |
| Input compatibility | Absolute encoder SSI output 16...25 bits |
| Input impedance | 270 Ohm counter input |
| Input logic | Positive |
| Input type | Current sink auxiliary input conforming to EN/IEC 1131 Type 2 |
| Input voltage | 24 V 8 mA auxiliary input |
| Input voltage limits | <= 5.5 V counter input |
| Leakage current | < 0.3 mA reflex output |
| Length of axis | 32000...32000000 P |
| Local signalling | 4 LEDs green axis diagnostics available |
| LSB value | 1.25 mV analogue output |
| Manufacturer | Schneider Electric |
| Maximum output current | 1.5 mA analogue output |
| Minimum load | 1 mA 1 V |
| Model # | TSX-CAY-41C |
| Module format | Double |
| Nominal output current | 0.5 A reflex output |
| Number of outputs | 4 analogue output static |
| Operating mode | Automatic |
| Output compatibility | Positive logic DC inputs (resistance <= 15 kOhm) reflex |
| Output overload protection | Current limiter reflex output |
| Output overvoltage protection | Zener diode between outputs and 24 DC reflex output |
| Output voltage | 24 V DC reflex output |
| Output voltage limits | 19...30 V reflex output |
| Part Number | TSXCAY41C |
| Power dissipation in W | 10...17 W |
| Product or component type | Motion control modules |
| Product specific application | For servo motors |
| Resolution | <= 1000 position units per point |
| Reverse polarity protection | Reverse diode on supply reflex output |
| Servo loop type | Proportional to overshoot compensation and gain switching 4 ms |
| Short-circuit protection | Current limiter reflex output |
| Speed profile path | Trapezoidal or parabolic |
| Switching time | < 5 ms for servo drive validation |
| Type | Controllers |
| Type of axis | Following axis static ratio |
| Voltage drop | < 1 V at state on reflex output |
| Voltage state 0 guaranteed | <= 1.2 V counter input |
| Voltage state 1 guaranteed | >= 11 V auxiliary input |
| Warranty | 2 Year |
|
|
Guaranteed on-time delivery |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Competitive Prices |
|
|
Scheduling Flexibility |
|
|
Complete purchasing solutions |
The only independent
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We hope that you will visit us again the next time you need electromechanical parts and make us your strategic purchasing partner.
Request for Quote
